1000L Micro Brew House Beer Brewery Equipment

1000L Micro Brew House Beer Brewery Equipment

Ruijia 1000L Micro Brew House Beer Brewery Equipment equipped with high configuration mechanical relief valve, and suitable for make beer in sanitary environment.
Chat Now

Product Details

1000L Micro Brew House Beer Brewery Equipment Making Beer Machine

Brewhouse system 

Capacity: 100L-5000L or...

Material: SUS304/316 or red copper

Voltage: 208v/220v/380v/480v or...

Heating method: Electicity/Steam/Gas fire

 

Function

Mash/lauter tun: Do both mashing and lautering.

Brew kettle/whirlpool: Do both boiling and whirlpool.

Hot liquor tank: Prepare hot water for mashing, sparging and cleaning...

Plate heat exchanger: Cool the wort so as to get the right fermentation temperature.

Pump: Transfer wort between tanks.

 

Classification of brewhouse system

2-Vessel: Mash/Brew kettle+Lauter/Whirlpoo

              Mash/Lauter tun+Brew kettle/Whirlpool

3-Vessel: Mash tun+Lauter tun+Brew kettle/Whirlpool

              Mash/Brew kettle+Lauter tun+Whirlpool

4-Vessel: Mash tun+Lauter tun+Brew kettle+Whirlpool

Optional: Hot liquor tank or cold liquor tank

 

Configuration&Features

-Outside wall, SUS 304, thickness: 2mm

-Inside wall, SUS 304, thickness: 3mm

-Dome top and cone bottom, 160 degree

-Insulation: Polyurethane, thickness:100mm

-Interior Finish: Fine polishing to 0.4~0.6um without dead corner

-All TIG welding with pure argon protection

-Top mounted manway

-Side manway for spent grains

-False bottom for lauter tun, thickness: 5mm, tapered-profiled perforations(wedge type), assemble and disassemble

-Sight glass after lautering

-Tangential inlet for whirlpool

-Sanitary centrifugal pump

-SUS304 Sanitary piping system

-Sparging arm for lauter tun

-VFD controlling for pumps and motors

-Automatic or semi-automatic control with pneumatic butterfly valves or electronic

-Plate heat exchanger, two stages for glycol water and cool water

-360° CIP spraying ball

-Thermowell with high accuracy temperature sensor: PT100

-3/4 support legs with height adjustable pad

-Level indicator (optional)

-Grist case/conical malt hopper (optional)

-Grist hydrator (optional)

 

 

 


 



Configuration&Features

-Exterior Shell:SUS304,thickness: 2.0mm;

-Interior Shell:SUS304,thickness: 3.0mm;

-Dome top and cone bottom, bottom cone, 60 degree

-Insulation: Polyurethane-thickness:100mm

-Interior Finish: Fine polishing to 0.4~0.6um without dead corner

-100% TIG welding with pure argon gas shield

-Cooling jacket: both on cone and cylinder parts, SUS304

-Cooling media: glycol water

-Dry hopping port on top                                  

-Top mounted manway

-Relief/vacuum valve on top, 3bar

-Sample valve

-Bunging device, 0.2-2.2bar adjustable

-Test Pressure:0.3Mpa,Working pressure 0.2Mpa

-Rotating racking arm on cone with butterfly valve

-Drainage arm with butterfly valve

-CIP arm with 360° coverage CIP spraying ball

-Thermowell with high accuracy temperature sensor: PT100

-3/4 support legs with height adjustable pad

-Complete valves, fittings and all parts

-Level indicator (optional)

-Dry hopping port on top (optional)

-Carbonation stone (optional)

-Red copper (optional)

 

 


Inquiry